The remote-controllable 6416m provides sixteen balanced mic- or line-level analog inputs to a Pro64 audio network. Features 16 mic-level inputs (XLR) with a switchable pad per channel for line-level inputs 16 passive analog thrus (DB25) Remote controllable over A-Net with MCS1 Control Surface Continuously variable gain control per channel Phase, low-cut filter, and phantom power per Channel Five-segment level meter per channel Individual channel activation switches Headphone monitor output Virtual Data Cable connectivity for GPIO, MIDI, and RS-232 Variable sample rates: 44.1kHz± to 192kHz± 24-bit A/D converters Internal universal power supply; IEC power connector

The 6416m Mic Input Module provides 16 balanced mic-level analog inputs to a Pro64 system. With a switchable Pad per channel, the 6416m also accepts balanced line-level inputs. Each channel also features continuous gain control, +48V phantom power, low cut filter, and a phase reverse switch. Audio settings for each channel can be configured from the front panel or controlled remotely using the optional MCS1 Mic Control Surface.

On the rear panel, the 6416m features both XLR jacks and DB25 multipin connectors for inputs and passive splits. Network connections use heavy duty locking Neutrik EtherCon connectors.

As with the 6416i Input Module, the 6416m can be set to operate in any of four 16-channel banks within the Pro64 network. Each audio channel can be individually activated as needed.

The Pro64 network supports three ranges of variable sample rates: 44.1/48kHz±, 96kHz±, and 192kHz±. No matter the sample rate, all 16 input channels on the 6416m are available for use. All audio is streamed at 24-bit resolution with no data compression at any time.

The 64616m also includes MIDI In, MIDI Out, RS-232, and GPIO for connecting to Pro64's Virtual Data Cables™.

The 6416m is ideally suited for use in a digital snake in a live or studio environment.

Specifications Channels 16 inputs Mic-level XLR Inputs: Pin 1: Shield; Pin 2: Audio 0°; Pin 3: Audio 180° Operating Level +4dBu Input Impedance 2.4k Ohms Input Gain Range 0-60dB, variable, in 1dB increments Pad -20dB, per channel Low Cut Filter 80Hz rolloff, per channel Phantom Power +48V, individually selectable per channel Passive Splitter: (2) DB25 connectors: channels 1-8 and 9-16 Output Level Range: +4dBu Maximum Input Level: +24dBu A/D Sample Rates (kHz): 44.1/48, 88.2, 96, 176.4, 192;±10% at each rate Bit depth is 24-bit Frequency Response: -0.1dB 10Hz-20kHz (at 1x sample rate) THD +N: < .0001% Virtual Data Cables: (VDC™)

14 VDC Slots available MIDI In, MIDI Out 5-pin DIN RS-232 DB9 connector; DIP switch configuration GPIO In (x4), Out (x4); terminal block connectors; DIP switch configuration; TTL or isolated Headphone Monitor: 1/4" TRS jack, with level control A-Net: 2 EtherCon RJ45 connectors Power Supply: 100-240VAC 50-60Hz, 24W Internal switching type; IEC connector Signal to Noise: A/D: -114dB (unweighted) Dimensions: 3U; 19"w x 8"d x 5.25"h (482.6 x 203 x 133.3 mm) Weight: 12 pounds (5.44 kilo)