Product Description









10 Channel Audio System - analog and digital 2 separate MIDI interfaces 24 bit /96 kHz audio resolution for each channel 4 Meter connection link cable to PCI card or FireWire!" interface Alternatively PCI or FireWire!" interface Multi-platform support - MAC and PC

Technical Data

External 19" device (1U) with PCI or IEEE 1394 (FireWire) interface card 8 balanced analog 1/4" (TRS) input jacks 8 balanced analog 1/4" (TRS) output jacks 8 gain controllers on the front side (20 dB adjustment range) 8 input signal and clipping LEDs on the front side 2 XLR/6.3 mm jacks microphone inputs (front side) as alternatives to line inputs 7 and 8 Inputs 7 and 8 switchable between line/instrument and mic level 48 V phantom power (switchable) to the microphone inputs External power supply, 230V/50Hz or 110V/60 Hz to 12V AC 2 separate MIDI interfaces with 5-pin DIN connector 24 Bit/96 kHz A/D converters with 100 dB (A) SNR*, typically 100 dB (A) @ 48 kHz 24 Bit/96 kHz D/A converters with 110 dB (A) SNR*, typically 109 dB (A) @ 48 kHz WordClock I/O

PCI Card

PHASE 88 PCI card 4 m cable to the PHASE 88 Rack module 10 inputs and 10 outputs in total 20 channel hardware mixer Digital input with 2 channels (coaxial S/PDIF, 24 Bit/ 96 kHz) Digital output with 2 channels (coaxial S/PDIF, 24 Bit/ 96 kHz) None-Audio Mode for transferring AC3 or DTS via digital output Hardware VU-Meter for each channel (displayed in the control panel) Busmaster transfer supports '24 Bit 4 Byte mode' (32 Bit) EWS-Connect link**

Software

WDM driver for Windows MAC OS X support projected Support for ASIO 2.0 and GigaStudio (GSIF) ASIO/GSIF multi-client mode "WDM Kernel Streaming" (e.g. for Sonar) MME- and DirectSound support Control Panel for Windows 98SE/ME/2000/XP (MAC OS X projected)

PC Requirements

Pentium II 450 or higher 128 MB RAM Windows 98SE, ME, 2000 or XP

Mac Requirements

G4 800 MHz 256 MB RAM MAC OS X 10.3.6 or higher



When you're ready for serious recording power, it's time to turn to the PHASE 88 PCI audio system. With eight balance 1/4" analog inputs and outputs, you have plenty of room to stretch out and play with your recordings. If you want to go really nuts, up to 4 PCI cards can be cascaded with a single driver, giving you no less than 40 audio channels for simultaneous use. Two of the channels on the PHASE 88 can quickly be adapted to microphone use with their XLR inputs and switchable 48V phantom power. Each channel has an individual adjustment for gain and LEDs status lights to keep you from clipping. With true 24 Bit/96 kHz recording capability, the quality of your recordings will be outstanding.

A two channel digital I/O (SPDIF) with coaxial connectors can be used to connect your DAT recorder or other equipment. In addition, a standard WorldClock I/O keep you in sync with your external digital equipment.

With the PHASE 88 Rack PCI audio interface you get superb quality at an excellent price. Proven converters and a sophisticated board design make this interface a workhorse and the signal-to-noise ratio of 110 dB (A) really speaks for itself.

The PHASE 88 is also future-proof. You can easily replace that PCI connection with an optional firewire interface (not included).